Permits, Right-of-Way Rules, Culverts, Materials, and Drainage
A driveway looks like it sits entirely on your property, but the last stretch, called the apron, usually crosses public right-of-way between your property line and the road. That’s why a new driveway, a wider one, or a switch from concrete to pavers often needs more than one approval: a permit for the work on your lot, a right-of-way or driveway permit for the apron, and HOA approval if you have one. In rural areas with roadside ditches, the county may also require a culvert pipe under the driveway so water keeps flowing. This guide compares real requirements from Orange, Seminole, and Lake counties and the City of Orlando, explains culverts and drainage, compares materials for Florida conditions, and ends with a checklist. It’s part four of our series on yard and home rules.
Short version: Expect a permit. Unincorporated Orange County says a permit is required “anytime you are pouring concrete or placing pavers,” with pavers needing only a zoning permit. Work on the apron in the public right-of-way is reviewed separately by the county or city that maintains the road. Seminole County caps residential driveways at 18 feet wide plus 3-foot flares, requires 6-inch, 3,000 psi concrete in the right-of-way, and requires a culvert of at least 18 inches where a driveway crosses a ditch. Lake County charges $50, keeps pavers out of the right-of-way, and requires at least a 15-inch culvert where one is needed. The City of Orlando allows pavers in its right-of-way only under a recorded agreement that makes you responsible for maintenance and removal. A driveway can’t block drainage. Your HOA can control material, color, and width, and roads maintained by the state require a separate FDOT connection permit. Call 811 before digging.
Two parts, two sets of rules
- On your lot: the driveway from your garage to your property line is covered by your county or city’s building or zoning permit rules, setbacks, and any limits on paved area. HOA rules also apply here.
- The apron: the part between your property line and the road usually sits in public right-of-way. Whoever maintains the road, whether it’s the county, the city, or the state, sets the width, thickness, materials, sidewalk crossing, and culvert rules.
- Who owns the road: roads inside city limits are usually city roads, unincorporated roads are usually county roads, and numbered state roads belong to the Florida Department of Transportation. Private roads in gated communities are often owned by the HOA.
The right-of-way often extends several feet past the curb or road edge, so check your survey before assuming where your property ends. See easements and access rights.
How driveway rules compare
| Seminole County | Lake County | |
|---|---|---|
| Width | 18 feet maximum, plus 3-foot flares on each side (24 feet at the road) | 10 to 24 feet at the property line; up to 32 feet at the road edge with flares or radius |
| Placement | At least 5 feet from the property line and 6 feet from a neighbor’s flare | At least 100 feet from the nearest intersecting road and 10 feet from the nearest property corner (joint driveways exempt) |
| Apron material | 6-inch concrete, 3,000 psi minimum; pavers allowed in the right-of-way but not in sidewalks or crosswalks | 6-inch limerock base with asphalt, or 6-inch reinforced concrete; no pavers in the right-of-way |
| Culvert | Required at ditches; 18 inches minimum or as set by the County Engineer, with mitered ends | May be required; match neighborhood culverts, or at least 15 inches by 30 feet |
| Sidewalk | Replace the sidewalk section with 6-inch-thick concrete; crossing slope no more than 2% | 4-foot ADA path across the apron; 6 inches thick; cross slope no more than 1.5% |
| Fee and timing | Fee set by county schedule; working without a permit carries a penalty of at least the permit fee | $50; permit valid one year |
From each county’s residential driveway permit application. These apply to county-maintained roads. Cities, including those inside these counties, set their own standards.
Two more local examples:
- Unincorporated Orange County: its permit guide says “anytime you are pouring concrete or placing pavers, a permit is required.” Pavers need a zoning permit rather than a building permit. Work in county right-of-way goes through the county’s right-of-way utilization permit process.
- City of Orlando: pavers in the city right-of-way need a recorded agreement. It’s a revocable license, you pay for maintenance, and if the city revokes it, you have 20 days to remove the pavers and restore the right-of-way or the city does it and bills you. The agreement binds future owners.
Culverts and drainage
In neighborhoods without curbs, roadside swales and ditches carry stormwater. A driveway that fills a ditch without a pipe acts like a dam and can flood your yard, your neighbor’s, or the road. That’s why counties require culverts:
- Size: set by the county, often by matching existing pipes on the street. Seminole sets 18 inches as its minimum, and Lake requires 15 inches if no neighboring culverts exist.
- Shallow swales: instead of a pipe, Seminole notes the driveway may need to dip, or be inverted, so water can flow across it.
- Keep it clear: sediment, grass clippings, and debris clog culverts. Clearing the pipe ends is usually the homeowner’s job in practice, so ask your county who maintains it.
- Don’t send water to the neighbor: a wider driveway adds runoff. Slope it toward the street or swale, not across the lot line.
If your lot is in a flood zone, ask how the extra paved area affects your site plan. See flood zones explained.
Materials for Florida conditions
| Material | Strengths | Watch for |
|---|---|---|
| Concrete | Long-lasting, low maintenance, accepted in most rights-of-way | Cracks from tree roots and settling; stains; hot in summer sun |
| Pavers | Individual pieces can be lifted and reset; many HOA-approved styles; some let water drain through | Often limited or barred in the right-of-way; weeds and ants in joints; sand base can wash out |
| Asphalt | Common on rural lots and long driveways | Softens in heat; needs periodic sealing; some HOAs don’t allow it |
| Gravel, shell, or crushed stone | Lets water soak in; inexpensive for long rural drives | Migrates onto the road; needs edging and regular raking; usually not allowed for the apron on paved roads |
General guidance. Check your HOA’s approved materials and your county’s right-of-way standards before choosing.
Keep new driveways away from large tree roots. Cutting roots to make room can destabilize the tree, and roots will crack slabs over time. See tree care and removal.
HOA approval and state roads
- HOA: most HOAs require architectural approval for driveway changes, including widening, new materials, and color, even for sealing or painting. Under Section 720.3035, the HOA can’t require a building permit before reviewing your application, and a denial must cite the specific rule in writing. See Florida HOA rules.
- State roads: connecting a driveway to a road on the State Highway System is governed by FDOT’s access management rules in Chapter 14-96 of the Florida Administrative Code. Contact your FDOT district before building or changing a driveway on a state road.
Before you build: a checklist
- Find out who maintains your road: city, county, state, or HOA.
- Pull your survey to see where your property line and the right-of-way are.
- Get HOA approval for size, material, and color.
- Apply for the permits: one for work on your lot and one for the apron in the right-of-way, if your county or city requires both.
- Ask whether you need a culvert, and what size.
- Contact 811 at least two full business days before digging.
- Schedule inspections when the county or city requires them, and keep the permit with your home records.
For more on permits, see Florida building permits. Other articles in this series cover fence rules and backyard rules for fires, fireworks, and noise.
Yard and home rules series:
- Tree care and removal
- Fence rules
- Backyard rules: fires, fireworks, and noise
- Driveways (this article)
- Water heater maintenance
Frequently Asked Questions
In unincorporated Orange County, yes. The county says a permit is required anytime you pour concrete or place pavers, and pavers need a zoning permit. Work on the apron in the county right-of-way is reviewed separately.
It depends on who owns the road. Lake County doesn’t allow pavers in the right-of-way, Seminole County allows them outside sidewalks and crosswalks, and the City of Orlando allows them only under a recorded agreement that makes you responsible for maintenance and removal.
If your driveway crosses a roadside ditch or swale, usually yes. Seminole County requires at least an 18-inch pipe with mitered ends at ditches, and Lake County requires matching the neighborhood or at least 15 inches. On shallow swales, the driveway may instead dip to let water across.
It’s set locally. Seminole County allows 18 feet plus 3-foot flares on each side. Lake County allows up to 24 feet at the property line. Your HOA may set a smaller limit.
If your documents give it architectural review authority, usually yes, including for changes in width, material, or color. Florida law bars the HOA from requiring a building permit before its review, and any denial must cite the specific rule in writing.
Sources
- Orange County: Do I need a permit?
- Orange County: Site work permits
- Seminole County: Residential driveway permit application
- Lake County: Residential driveway permit application (February 2026)
- City of Orlando: Right-of-way driveway pavers agreement
- Florida Administrative Code, Rule 14-96.003: State highway access connection permits
- Florida Statutes (2026), Chapter 720: Homeowners’ Associations (Section 720.3035)
- Sunshine 811: Homeowner FAQ
This article is for general informational purposes only and isn’t financial, legal, insurance, or tax advice – for guidance specific to your situation, talk to a licensed professional.